Do shelf pushers and dividers work in chilled, wet or frozen conditions?

What changes in a cold or wet bay

• Divider material — the JL-30 to JL-35 transparent PET shelf dividers are the usual choice for cold bays; PET keeps its shape at low temperature and wipes clean.
• Mounting — the JL-16A and JL-16B magnetic shelf pushers use a magnetic base, so nothing is drilled into a chilled shelf and there are no rust-prone screw holes.
• Spring — our constant-force springs are 304 stainless, which resists condensation and repeated wash-downs; tension is available in the standard 2N / 4N / 6N / 10N / 15N grades.
• Drainage — open lanes and open divider sides let melt water drain instead of pooling behind the pusher; enclosed pockets are the feature to avoid.
• Feed control — for small bottles in a cold bay, the JL-8 cable-damping pusher feeds silently and slowly, which stops wet lightweight packs from sliding forward.