Retail Display Solutions Expert

Language:

Transform Retail Spaces, Drive Sales Growth

Home / All / Products FAQ / Which acrylic thickness do I need for table tents, sign holders, and POP displays?

Which acrylic thickness do I need for table tents, sign holders, and POP displays?

Update Time:2026/10/29

A:2 mm is the practical minimum. 3 mm is what most table tents and A4/A5 sign holders are made from, and 5–8 mm is used where the panel is unsupported or has to carry product weight. What decides it is the free span between supports, not the overall panel size.

2 mm minimumLow-touch countertop use

3 mm standardSign holders and talkers

5–10 mmLoad bearing, wide span

Thickness by application

2 mm — countertop table tents up to A5, light handling, short campaigns.
3 mm — standard A4/A5 sign holders, brochure stands, and shelf talkers; the best balance of cost and rigidity.
5 mm — freestanding counter displays, wide-span dividers, and high-touch hotel or clinic settings.
8–10 mm — unsupported POP panels, stepped risers, and anything that carries product weight.

Thicker is not automatically better

Past 8 mm, edge polishing and weight push the cost up faster than rigidity improves, and a thick panel seated in a thin slotted base will crack at the joint. Send us the span, the load, and how often staff handle the unit, and we will call out thickness and edge finish on the drawing.

Need help specifying the panel?

See our design support

Previous Powder coating, anodizing, or chrome plating: which finish is right for a metal display?

Next Do you work with distributors, agents and trading companies, and how are partner terms handled?

FAQs